Preserves the fn accessors within the Monero crates so that we can use statics
in some cfgs yet not all (in order to provide support for more low-memory
devices) with the exception of `H` (which truly should be cached).
* Rename the coins folder to networks
Ethereum isn't a coin. It's a network.
Resolves#357.
* More renames of coins -> networks in orchestration
* Correct paths in tests/
* cargo fmt
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
* Check if the serai wasm was built successfully by verifying the build container's status code and state, instead of checking the volume mountpoint locally
* Use a log statement for which wasm is used
* Minor typo fix
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
Moves from concatted Dockerfiles to pseudo-templated Dockerfiles via a dedicated Rust program.
Removes the unmaintained kubernetes, not because we shouldn't have/use it, but because it's unmaintained and needs to be reworked before it's present again.
Replaces the compose with the work in the new orchestrator binary which spawns everything as expected. While this arguably re-invents the wheel, it correctly manages secrets and handles the variadic Dockerfiles.
Also adds an unrelated patch for zstd and simplifies running services a bit by greater utilizing the existing infrastructure.
---
* Delete all Dockerfile fragments, add new orchestator to generate Dockerfiles
Enables greater templating.
Also delete the unmaintained kubernetes folder *for now*. This should be
restored in the future.
* Use Dockerfiles from the orchestator
* Ignore Dockerfiles in the git repo
* Remove CI job to check Dockerfiles are as expected now that they're no longer committed
* Remove old Dockerfiles from repo
* Use Debian for monero-wallet-rpc
* Remove replace_cmds for proper usage of entry-dev
Consolidates ports a bit.
Updates serai-docker-tests from "compose" to "build".
* Only write a new dockerfile if it's distinct
Preserves the updated time metadata.
* Update serai-docker-tests
* Correct the path Dockerfiles are built from
* Correct inclusion of orchestration folder in Docker builds
* Correct debug/release flagging in the cargo command
Apparently, --debug isn't an effective NOP yet an error.
* Correct path used to run the Serai node within a Dockerfile
* Correct path in Monero Dockerfile
* Attempt storing monerod in /usr/bin
* Use sudo to move into /usr/bin in CI
* Correct 18.3.0 to 18.3.1
* Escape * with quotes
* Update deny.toml, ADD orchestration in runtime Dockerfile
* Add --detach to the Monero GH CI
* Diversify dockerfiles by network
* Fixes to network-diversified orchestration
* Bitcoin and Monero testnet scripts
* Permissions and tweaks
* Flatten scripts folders
* Add missing folder specification to Monero Dockerfile
* Have monero-wallet-rpc specify the monerod login
* Have the Docker CMD specify env variables inserted at time of Dockerfile generation
They're overrideable with the global enviornment as for tests. This enables
variable generation in orchestrator and output to productionized Docker files
without creating a life-long file within the Docker container.
* Don't add Dockerfiles into Docker containers now that they have secrets
Solely add the source code for them as needed to satisfy the workspace bounds.
* Download arm64 Monero on arm64
* Ensure constant host architecture when reproducibly building the wasm
Host architecture, for some reason, can effect the generated code despite the
target architecture always being foreign to the host architecture.
* Randomly generate infrastructure keys
* Have orchestrator generate a key, be able to create/start containers
* Ensure bash is used over sh
* Clean dated docs
* Change how quoting occurs
* Standardize to sh
* Have Docker test build the dev Dockerfiles
* Only key_gen once
* cargo update
Adds a patch for zstd and reconciles the breaking nightly change which just
occurred.
* Use a dedicated network for Serai
Also fixes SERAI_HOSTNAME passed to coordinator.
* Support providing a key over the env for the Serai node
* Enable and document running daemons for tests via serai-orchestrator
Has running containers under the dev network port forward the RPC ports.
* Use volumes for bitcoin/monero
* Use bitcoin's run.sh in GH CI
* Only use the volume for testnet (not dev)
* create Dockerfile for monero wallet rpc with dockerfiles.sh
* make monero wallet rpc docker accessible from outside
* connect wallet-rpc with monerod
* add generated Dockerfile for monero wallet rpc
* add monero wallet rpcs to docker profiles
* update getting started guide to refer to wallet rpc docker
