* Update `build-dependencies` CI action
* Update `develop` to `patch-polkadot-sdk`
Allows us to finally remove the old `serai-dex/substrate` repository _and_
should have CI pass without issue on `develop` again.
The changes made here should be trivial and maintain all prior
behavior/functionality. The most notable are to `chain_spec.rs`, in order to
still use a SCALE-encoded `GenesisConfig` (avoiding `serde_json`).
* CI fixes
* Add `/usr/local/opt/llvm/lib` to paths on macOS hosts
* Attempt to use `LD_LIBRARY_PATH` in macOS GitHub CI
* Use `libp2p 0.56` in `serai-node`
* Correct Windows build dependencies
* Correct `llvm/lib` path on macOS
* Correct how macOS 13 and 14 have different homebrew paths
* Use `sw_vers` instead of `uname` on macOS
Yields the macOS version instead of the kernel's version.
* Replace hard-coded path with the intended env variable to fix macOS 13
* Add `libclang-dev` as dependency to the Debian Dockerfile
* Set the `CODE` storage slot
* Update to a version of substrate without `wasmtimer`
Turns out `wasmtimer` is WASM only. This should restore the node's functioning
on non-WASM environments.
* Restore `clang` as a dependency due to the Debian Dockerfile as we require a C++ compiler
* Move from Debian bookworm to trixie
* Restore `chain_getBlockBin` to the RPC
* Always generate a new key for the P2P network
* Mention every account on-chain before they publish a transaction
`CheckNonce` required accounts have a provider in order to even have their
nonce considered. This shims that by claiming every account has a provider at
the start of a block, if it signs a transaction.
The actual execution could presumably diverge between block building (which
sets the provider before each transaction) and execution (which sets the
providers at the start of the block). It doesn't diverge in our current
configuration and it won't be propagated to `next` (which doesn't use
`CheckNonce`).
Also uses explicit indexes for the `serai_abi::{Call, Event}` `enum`s.
* Adopt `patch-polkadot-sdk` with fixed peering
* Manually insert the authority discovery key into the keystore
I did try pulling in `pallet-authority-discovery` for this, updating
`SessionKeys`, but that was insufficient for whatever reason.
* Update to latest `substrate-wasm-builder`
* Fix timeline for incrementing providers
e1671dd71b incremented the providers for every
single transaction's sender before execution, noting the solution was fragile
but it worked for us at this time. It did not work for us at this time.
The new solution replaces `inc_providers` with direct access to the `Account`
`StorageMap` to increment the providers, achieving the desired goal, _without_
emitting an event (which is ordered, and the disparate order between building
and execution was causing mismatches of the state root).
This solution is also fragile and may also be insufficient. None of this code
exists anymore on `next` however. It just has to work sufficiently for now.
* clippy
The new `FieldElement::from_u256` is sufficient to load an unreduced value. The
caller can perform the square themselves, without us explicitly supporting this
special case.
Updates the monero-oxide version used to one which no longer uses
`FieldElement::from_square` (as their use is why it was added).
* move economic security into it's own pallet
* fix deny
* Update Cargo.toml, .github for the new crates
* Remove unused import
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
* Rename the coins folder to networks
Ethereum isn't a coin. It's a network.
Resolves#357.
* More renames of coins -> networks in orchestration
* Correct paths in tests/
* cargo fmt
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
* fix total allocated stake update in wrong time
* Restore mid-set increases
* Correct typo I introduced
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
* add node side unit test
* complete rotation test for all networks
* set up the fast-epoch docker file
* fix pr comments
* add coordinator side rotation test
* bug fixes
* Remove EPOCH_INTERVAL
* Minor nits
* Add note on origin of publish_tx function in tests/coordinator
* Correct ThresholdParams assert_eq
* fmt
* Correct detection of handover completion
* Restore key gen message match from develop
It was modified in response to the handover completion bug, which has now been
resolved.
* bug fixes
* Correct invalid constant
* Typo fixes
* remove selecting participant to remove at random
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
We prior required they had the same encoding, yet this ensures they do by
making them one and the same. This does require an large, ugly, From/TryInto
block which is deemed preferable for moving this more and more into syntax
(from semantics).
Further improvements (notably re: Extra) is possible, and this already lets us
strip some members from the Call enum.
* Check if the serai wasm was built successfully by verifying the build container's status code and state, instead of checking the volume mountpoint locally
* Use a log statement for which wasm is used
* Minor typo fix
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
